periph_conf.h File Reference
Peripheral MCU configuration for the Airfy Beacon board. More...
Detailed Description
Peripheral MCU configuration for the Airfy Beacon board.
Definition in file periph_conf.h.
#include "periph_cpu.h"#include "cfg_clock_16_1.h"#include "cfg_timer_012.h"#include "cfg_rtt_default.h"
Include dependency graph for periph_conf.h:Go to the source code of this file.
UART configuration | |
The CPU only supports one UART device, so we keep it simple | |
| #define | UART_NUMOF (1U) |
| #define | UART_PIN_RX 17 |
| #define | UART_PIN_TX 18 |
SPI configuration | |
| #define | SPI_NUMOF ARRAY_SIZE(spi_config) |
| static const spi_conf_t | spi_config [] |
I2C (TWI) configuration | |
| #define | I2C_NUMOF ARRAY_SIZE(i2c_config) |
| static const i2c_conf_t | i2c_config [] |
ADC configuration | |
The configuration consists simply of a list of channels that should be used | |
| #define | ADC_NUMOF ARRAY_SIZE(adc_config) |
| static const adc_conf_t | adc_config [] = {3, 4, 5, 6} |
Variable Documentation
◆ i2c_config
|
static |
Initial value:
= {
{
.dev = NRF_TWI0,
.pin_scl = 7,
.pin_sda = 8,
.ppi = 0,
.speed = I2C_SPEED_NORMAL,
},
{
.dev = NRF_TWI1,
.pin_scl = 9,
.pin_sda = 10,
.ppi = 1,
.speed = I2C_SPEED_NORMAL,
}
}
Definition at line 63 of file periph_conf.h.
◆ spi_config
|
static |
Initial value:
= {
{
.dev = NRF_SPI0,
.sclk = 15,
.mosi = 13,
.miso = 14
}
}
Definition at line 47 of file periph_conf.h.
