periph_conf.h File Reference

Peripheral MCU configuration for the OpenMote-B board. More...

Detailed Description

Peripheral MCU configuration for the OpenMote-B board.

Author

Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de

Sebastian Meiling s@mln.nosp@m.g.ne.nosp@m.t

Kevin Weiss kevin.nosp@m..wei.nosp@m.ss@ha.nosp@m.w-ha.nosp@m.mburg.nosp@m..de

Definition in file periph_conf.h.

#include "cc2538_gpio.h"
#include "periph_cpu.h"
#include "cfg_clk_default.h"
#include "cfg_timer_default.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

ADC configuration
#define	SOC_ADC_ADCCON3_EREF   SOC_ADC_ADCCON3_EREF_AVDD5
#define	ADC_NUMOF   ARRAY_SIZE(adc_config)
static const adc_conf_t	adc_config []

UART configuration
#define	UART_0_ISR   isr_uart0
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

I2C configuration
#define	I2C_IRQ_PRIO   1
#define	I2C_NUMOF   ARRAY_SIZE(i2c_config)
static const i2c_conf_t	i2c_config []

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []

Variable Documentation

adc_config

const adc_conf_t adc_config[]

static

Initial value:

= {
    GPIO_PIN(1, 0), 
    GPIO_PIN(1, 1), 
    GPIO_PIN(1, 2), 
    GPIO_PIN(1, 3), 
    GPIO_PIN(2, 3), 
    GPIO_PIN(0, 7), 
 
}

Definition at line 41 of file periph_conf.h.

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .speed = I2C_SPEED_FAST,    
        .scl_pin = GPIO_PIN(1, 5),  
        .sda_pin = GPIO_PIN(1, 4)   
    },
}

Definition at line 83 of file periph_conf.h.

spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .num      = 0,
        .mosi_pin = GPIO_PIN(0, 5),
        .miso_pin = GPIO_PIN(0, 4),
        .sck_pin  = GPIO_PIN(0, 2),
        .cs_pin   = GPIO_PIN(0, 3)
    },
}

Definition at line 98 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev      = UART0_BASEADDR,
        .rx_pin   = GPIO_PIN(0, 0),
        .tx_pin   = GPIO_PIN(0, 1),
 
 
 
 
    }
}

Definition at line 58 of file periph_conf.h.