periph_conf.h File Reference

Peripheral MCU configuration for the Yunjia NRF51822 board. More...

Detailed Description

Peripheral MCU configuration for the Yunjia NRF51822 board.

Author

Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "cfg_clock_16_0.h"
#include "cfg_timer_012.h"
#include "cfg_rtt_default.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

UART configuration
#define	UART_NUMOF   (1U)
#define	UART_PIN_RX   1
#define	UART_PIN_TX   2

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []

I2C (TWI) configuration
#define	I2C_NUMOF   ARRAY_SIZE(i2c_config)
static const i2c_conf_t	i2c_config []

ADC configuration
The configuration consists simply of a list of channels that should be used
#define	ADC_NUMOF   ARRAY_SIZE(adc_config)
static const adc_conf_t	adc_config [] = {4, 5, 6, 7}

Variable Documentation

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .dev     = NRF_TWI0,
        .pin_scl = 23,
        .pin_sda = 24,
        .ppi     = 0,
        .speed   = I2C_SPEED_NORMAL
    }
}

Definition at line 67 of file periph_conf.h.

spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .dev  = NRF_SPI0,
        .sclk = 19,
        .mosi = 17,
        .miso = 18
    },
    {
        .dev  = NRF_SPI1,
        .sclk = 22,
        .mosi = 20,
        .miso = 21
    }
}

Definition at line 45 of file periph_conf.h.