Feetech protocol definitions.
More...
Go to the source code of this file.
|
#define | FEETECH_START (0xFF) |
| |
| enum | scs15_baudrate_t {
SCS15_B_1M = 0,
SCS15_B_0_5M = 1,
SCS15_B_250K = 2,
SCS15_B_128K = 3,
SCS15_B_115200 = 4,
SCS15_B_76800 = 5,
SCS15_B_57600 = 6,
SCS15_B_38400 = 7
} |
| |
| enum | scs15_register8_t {
SCS15_ID = 5,
SCS15_BAUD_RATE = 6,
SCS15_RETURN_DELAY_TIME = 7,
SCS15_RETURN_LEVEL = 8,
SCS15_LIMIT_TEMPERATURE = 13,
SCS15_MAX_LIMIT_VOLTAGE = 14,
SCS15_MIN_LIMIT_VOLTAGE = 15,
SCS15_ALARM_LED = 18,
SCS15_ALARM_SHUTDOWN = 19,
SCS15_COMPLIANCE_P = 21,
SCS15_COMPLIANCE_D = 22,
SCS15_COMPLIANCE_I = 23,
SCS15_CW_DEAD = 26,
SCS15_CCW_DEAD = 27,
SCS15_TORQUE_ENABLE = 40,
SCS15_LED = 41,
SCS15_LOCK = 48,
SCS15_PRESENT_VOLTAGE = 62,
SCS15_PRESENT_TEMPERATURE = 63,
SCS15_REGISTERED_INSTRUCTION = 64,
SCS15_ERROR = 65,
SCS15_MOVING = 66
} |
| |
| enum | scs15_register16_t {
SCS15_MODEL_NUMBER = 0,
SCS15_VERSION = 3,
SCS15_MIN_ANGLE_LIMIT = 9,
SCS15_MAX_ANGLE_LIMIT = 11,
SCS15_MAX_TORQUE = 16,
SCS15_PUNCH = 24,
SCS15_IMAX = 28,
SCS15_OFFSET = 30,
SCS15_GOAL_POSITION = 42,
SCS15_GOAL_TIME = 44,
SCS15_GOAL_SPEED = 46,
SCS15_PRESENT_POSITION = 56,
SCS15_PRESENT_SPEED = 58,
SCS15_PRESENT_LOAD = 60,
SCS15_VIR_POSITION = 67,
SCS15_CURRENT = 69
} |
| |
| enum | feetech_intruction_t {
INST_PING = 0x01,
INST_READ = 0x02,
INST_WRITE = 0x03,
INST_REG_WRITE = 0x04,
INST_ACTION = 0x05,
INST_RESET = 0x06,
INST_SYNC_WRITE = 0x83
} |
| |
This graph shows which files directly or indirectly include this file: