Support for the Arduino MKRFOX1200 board. More...
Detailed Description
Support for the Arduino MKRFOX1200 board.
General information
The Arduino MKRFOX1200 board is a learning and development board that provides Sigfox connectivity and is powered by an Atmel SAMD21 microcontroller.
Pinout
Flash the board
Use BOARD=arduino-mkrfox1200 with the make command.
Example with hello-world application:
make BOARD=arduino-mkrfox1200 -C examples/hello-world flash
- Note
- If the application crashes, automatic reflashing via USB, as explained above won't be possible. In this case, the board must be set in bootloader mode by double tapping the reset button before running the flash command.
Accessing STDIO via UART
STDIO of RIOT is directly available over the USB port.
The TERM_DELAY environment variable can be used to add a delay (in second) before opening the serial terminal. The default value is 2s which should be enough in most of the situation.
Files | |
| file | board.h |
| Board specific definitions for the Arduino MKRFOX1200 board. | |
