STM32 Nucleo-L552ZE-Q

Support for the STM32 Nucleo-L552ZE-Q. More...

Detailed Description

Support for the STM32 Nucleo-L552ZE-Q.

Flashing the device

The ST Nucleo-L552ZE-Q board includes an on-board ST-LINK programmer and can be flashed using OpenOCD.

Note

The upstream version of OpenOCD doesn't contain yet support for this board, so the source code version from http://openocd.zylin.com/#/c/5510 must be built to be able to flash this board (adapt the configure command with your preferred installation directory):

$ git clone https://git.code.sf.net/p/openocd/code openocd
$ cd openocd
$ git fetch http://openocd.zylin.com/openocd refs/changes/10/5510/5 && git checkout FETCH_HEAD
$ ./bootstrap
$ ./configure --prefix=<installation directory>
$ make -j
$ sudo make install

Once the patched OpenOCD is built and installed, you can flash the board simply by typing

make BOARD=nucleo-l552ze-q flash

and debug via GDB by simply typing

make BOARD=nucleo-l552ze-q debug

Supported Toolchains

For using the ST Nucleo-L552ZE-Q board we recommend the usage of the GNU Tools for ARM Embedded Processors toolchain.

Files
file	periph_conf.h
	Peripheral MCU configuration for the nucleo-l552ze-q board.