Silicon Labs EFM32/EFR32/EZR32

Silicon Labs's EFM32/EFR32/EZR32 MCUs implementation. More...

Detailed Description

Silicon Labs's EFM32/EFR32/EZR32 MCUs implementation.

This module contains all code and definitions for the Silicon Labs EFM32/EFR32/EZR32 MCUs. It uses the Gecko SDK (vendor library) for the peripheral drivers.

Supported Peripherals

The following peripherals are supported (depends on microcontroller):

• ADC
• CPUID
• DAC
• Flash page
• GPIO
• HW RNG
• I2C
• Power Management
• PWM
• RTC
• RTT
• SPI
• Timer
• UART (including low-power)

Clock Configuration

By default the microcontroller will run on the internal RC-oscillator. If an external crystal is available, you can configure it to use by setting CLOCK_HF=cmuSelect_HFXO. The same applies for CLOCK_LFA, CLOCK_LFB and CLOCK_LFE using cmuSelect_LFXO.

If the internal RC-oscillator is not used, it will be disabled.

Refer to the reference manual of the specific microcontroller for the specifics.

EMU and CMU Configuration

The Energy Management Unit (EMU) and Clock Management Unit (CMU) are initialized using default values provided by the Gecko SDK. You can override any of the following defaults to use other values:

• CMU_HFXOINIT
• CMU_LFXOINIT
• EMU_DCDCINIT
• EMU_EM23INIT
• EMU_EM4INIT

Refer to the Gecko SDK for more information about these values.

Low-power Configuration

The EFM32/EFR32/EZR32 MCUs have support for low-power peripherals. Support is enabled by default, but can be disabled if not used.

• Setting EFM32_LEUART_ENABLED=0 will disable support for the LEUART in the UART driver peripheral and save approximately 400 bytes.

Refer to cpu/efm32/efm32-features.mk for more options.

Modules
	EFM32 specific drivers
	Specific drivers for the EFM32 family of CPUs.
	Silicon Labs EFM32GG family
	Silicon Labs's EFM32GG MCUs family implementation.
	Silicon Labs EFM32LG family
	Silicon Labs's EFM32LG MCUs family implementation.
	Silicon Labs EFM32PG12B family
	Silicon Labs's EFM32PG12B MCUs family implementation.
	Silicon Labs EFM32PG1B family
	Silicon Labs's EFM32PG1B MCUs family implementation.
	Silicon Labs EFM32ZG family
	Silicon Labs's EFM32ZG MCUs family implementation.
	Silicon Labs EFR32MG12P family
	Silicon Labs's EFR32MG12P MCUs family implementation.
	Silicon Labs EFR32MG1P family
	Silicon Labs's EFR32MG1B MCUs family implementation.
	Silicon Labs EFR32MG1P family
	Silicon Labs's EFR32MG1P MCUs family implementation.
	Silicon Labs EZR32WG family
	Silicon Labs's EZR32WG MCUs family implementation.

Files
file	cpu_conf.h
	Implementation specific CPU configuration options.
file	periph_cpu.h
	CPU specific definitions for internal peripheral handling.