sht1x.h File Reference
SHT10/SHT11/SHT15 Device Driver. More...
Detailed Description
SHT10/SHT11/SHT15 Device Driver.
Definition in file sht1x.h.
Include dependency graph for sht1x.h: This graph shows which files directly or indirectly include this file:Go to the source code of this file.
Data Structures | |
| struct | sht1x_dev_t |
| SHT10/11/15 temperature humidity sensor. More... | |
| struct | sht1x_params_t |
| Parameters required to set up the SHT10/11/15 device driver. More... | |
Enumerations | |
| enum | sht1x_conf_t { SHT1X_CONF_LOW_RESOLUTION = 0x01, SHT1X_CONF_SKIP_CALIBRATION = 0x02, SHT1X_CONF_ENABLE_HEATER = 0x04, SHT1X_CONF_SKIP_CRC = 0x08 } |
| Possible configuration (=status byte) values of the SHT10/11/15. More... | |
| enum | sht1x_vdd_t { SHT1X_VDD_5_0V = 0, SHT1X_VDD_4_0V = 1, SHT1X_VDD_3_5V = 2, SHT1X_VDD_3_0V = 3, SHT1X_VDD_2_5V = 4 } |
| Possible values for Vdd (measured temperature depends on it) | |
Functions | |
| int | sht1x_init (sht1x_dev_t *dev, const sht1x_params_t *params) |
| Initialize the SHT10/11/15 sensor. More... | |
| int16_t | sht1x_temperature (const sht1x_dev_t *dev, uint16_t raw) |
| Calculate the temperature from the raw input. More... | |
| int16_t | sht1x_humidity (const sht1x_dev_t *dev, uint16_t raw, int16_t temp) |
| Calculate the relative humidity from the raw input. More... | |
| int | sht1x_read (const sht1x_dev_t *dev, int16_t *temp, int16_t *hum) |
| Read the current temperature. More... | |
| int | sht1x_configure (sht1x_dev_t *dev, sht1x_conf_t conf) |
| Apply the given configuration (= status byte) to. More... | |
| int | sht1x_read_status (sht1x_dev_t *dev, uint8_t *status) |
| Read the status byte of an SHT1X sensor. More... | |
| int | sht1x_reset (sht1x_dev_t *dev) |
| Reset the sensor's configuration to default values. More... | |
