Device driver for the AMS TSL4531 sensor. More...
Device driver for the AMS TSL4531 sensor.
Definition in file tsl4531x.h.
Go to the source code of this file.
Data Structures | |
struct | tsl4531x_params_t |
Device initialization parameters. More... | |
struct | tsl4531x_t |
Device descriptor. More... | |
Enumerations | |
enum | tsl4531x_intgn_time_t { TSL4531X_INTEGRATE_400MS = 0, TSL4531X_INTEGRATE_200MS = 1, TSL4531X_INTEGRATE_100MS = 2 } |
Integration times. | |
Functions | |
int | tsl4531x_init (tsl4531x_t *dev, const tsl4531x_params_t *params) |
Initialize the TSL4531x device. More... | |
int | tsl4531x_set_low_power_mode (tsl4531x_t *dev, uint8_t low_power_on) |
Set the low power mode of the driver on or off. More... | |
int | tsl4531x_start_sample (tsl4531x_t *dev) |
Start collecting sample in low power mode. More... | |
uint32_t | tsl4531x_time_until_sample_ready (tsl4531x_t *dev) |
Deliver time in microseconds until sample is ready, or zero if it is ready. More... | |
int | tsl4531x_get_sample (const tsl4531x_t *dev) |
Reads the sample from the device immediately. More... | |
int | tsl4531x_simple_read (tsl4531x_t *dev) |
Reads the sample from the device. More... | |
Fixed values for different members of the TSL4531x series | |
#define | TSL45311_PARTNO (0x8) |
#define | TSL45313_PARTNO (0x9) |
#define | TSL45315_PARTNO (0xA) |
#define | TSL45317_PARTNO (0xB) |
#define | TSL45311_ADDR (0x39) |
TSL4531x I2C addresses. | |
#define | TSL45313_ADDR (0x39) |
#define | TSL45315_ADDR (0x29) |
#define | TSL45317_ADDR (0x29) |