periph_conf.h File Reference

Peripheral MCU configuration for the opencm904 board. More...

Detailed Description

Peripheral MCU configuration for the opencm904 board.

Author

Loïc Dauphin loic..nosp@m.daup.nosp@m.hin@i.nosp@m.nria.nosp@m..fr

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

#define	CONFIG_BOARD_HAS_HSE   1

Timer configuration
#define	TIMER_0_ISR   isr_tim2
#define	TIMER_1_ISR   isr_tim3
#define	TIMER_NUMOF   ARRAY_SIZE(timer_config)
static const timer_conf_t	timer_config []

UART configuration
#define	UART_0_ISR   isr_usart2
#define	UART_1_ISR   isr_usart1
#define	UART_2_ISR   isr_usart3
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

Variable Documentation

timer_config

const timer_conf_t timer_config[]

static

Initial value:

= {
    {
        .dev      = TIM2,
        .max      = 0x0000ffff,
        .rcc_mask = RCC_APB1ENR_TIM2EN,
        .bus      = APB1,
        .irqn     = TIM2_IRQn
    },
    {
        .dev      = TIM3,
        .max      = 0x0000ffff,
        .rcc_mask = RCC_APB1ENR_TIM3EN,
        .bus      = APB1,
        .irqn     = TIM3_IRQn
    }
}

Definition at line 38 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev        = USART2,
        .rcc_mask   = RCC_APB1ENR_USART2EN,
        .rx_pin     = GPIO_PIN(PORT_A, 3),
        .tx_pin     = GPIO_PIN(PORT_A, 2),
        .bus        = APB1,
        .irqn       = USART2_IRQn
    },
    {
        .dev        = USART1,
        .rcc_mask   = RCC_APB2ENR_USART1EN,
        .rx_pin     = GPIO_PIN(PORT_B, 7),
        .tx_pin     = GPIO_PIN(PORT_B, 6),
        .bus        = APB2,
        .irqn       = USART1_IRQn
    },
    {
        .dev        = USART3,
        .rcc_mask   = RCC_APB1ENR_USART3EN,
        .rx_pin     = GPIO_PIN(PORT_B, 11),
        .tx_pin     = GPIO_PIN(PORT_B, 10),
        .bus        = APB1,
        .irqn       = USART3_IRQn
    }
}

Definition at line 65 of file periph_conf.h.