periph_conf.h File Reference

Configuration of CPU peripherals for the SLSTK3402A starter kit. More...

Detailed Description

Configuration of CPU peripherals for the SLSTK3402A starter kit.

Author

Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de

Bas Stottelaar basst.nosp@m.otte.nosp@m.laar@.nosp@m.gmai.nosp@m.l.com

Definition in file periph_conf.h.

#include "cpu.h"
#include "periph_cpu.h"
#include "em_cmu.h"

Include dependency graph for periph_conf.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Clock configuration
#define	CLOCK_HF   cmuSelect_HFXO
#define	CLOCK_CORE_DIV   cmuClkDiv_1
#define	CLOCK_LFA   cmuSelect_LFXO
#define	CLOCK_LFB   cmuSelect_LFXO
#define	CLOCK_LFE   cmuSelect_LFXO

ADC configuration
#define	ADC_DEV_NUMOF   ARRAY_SIZE(adc_config)
#define	ADC_NUMOF   ARRAY_SIZE(adc_channel_config)
static const adc_conf_t	adc_config []
static const adc_chan_conf_t	adc_channel_config []

I2C configuration
#define	I2C_NUMOF   ARRAY_SIZE(i2c_config)
#define	I2C_0_ISR   isr_i2c0
static const i2c_conf_t	i2c_config []

RTT configuration
#define	RTT_MAX_VALUE   (0xFFFFFFFF)
#define	RTT_FREQUENCY   (1U)

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_dev_t	spi_config []

Timer configuration
The implementation uses two timers in cascade mode.
#define	TIMER_NUMOF   ARRAY_SIZE(timer_config)
#define	TIMER_0_ISR   isr_wtimer1
#define	TIMER_1_ISR   isr_timer1
#define	TIMER_2_ISR   isr_letimer0
static const timer_conf_t	timer_config []

UART configuration
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
#define	UART_0_ISR_RX   isr_usart0_rx
#define	UART_1_ISR_RX   isr_leuart0
static const uart_conf_t	uart_config []

Variable Documentation

adc_channel_config

const adc_chan_conf_t adc_channel_config[]

static

Initial value:

= {
    {
        .dev = 0,
        .input = adcPosSelTEMP,
        .reference = adcRef1V25,
        .acq_time = adcAcqTime8
    },
    {
        .dev = 0,
        .input = adcPosSelAVDD,
        .reference = adcRef5V,
        .acq_time = adcAcqTime8
    }
}

Definition at line 63 of file periph_conf.h.

adc_config

const adc_conf_t adc_config[]

static

Initial value:

= {
    {
        .dev = ADC0,
        .cmu = cmuClock_ADC0,
    }
}

Definition at line 56 of file periph_conf.h.

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .dev = I2C0,
        .sda_pin = GPIO_PIN(PC, 10),
        .scl_pin = GPIO_PIN(PC, 11),
        .loc = I2C_ROUTELOC0_SDALOC_LOC15 |
               I2C_ROUTELOC0_SCLLOC_LOC15,
        .cmu = cmuClock_I2C0,
        .irq = I2C0_IRQn,
        .speed = I2C_SPEED_NORMAL
    }
}

Definition at line 86 of file periph_conf.h.

spi_config

const spi_dev_t spi_config[]

static

Initial value:

= {
    {
        .dev = USART2,
        .mosi_pin = GPIO_PIN(PA, 6),
        .miso_pin = GPIO_PIN(PA, 7),
        .clk_pin = GPIO_PIN(PA, 8),
        .loc = USART_ROUTELOC0_RXLOC_LOC1 |
               USART_ROUTELOC0_TXLOC_LOC1 |
               USART_ROUTELOC0_CLKLOC_LOC1,
        .cmu = cmuClock_USART2,
        .irq = USART2_RX_IRQn
    }
}

Definition at line 115 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev = USART0,
        .rx_pin = GPIO_PIN(PA, 1),
        .tx_pin = GPIO_PIN(PA, 0),
        .loc = USART_ROUTELOC0_RXLOC_LOC0 |
               USART_ROUTELOC0_TXLOC_LOC0,
        .cmu = cmuClock_USART0,
        .irq = USART0_RX_IRQn
    },
    {
        .dev = LEUART0,
        .rx_pin = GPIO_PIN(PD, 11),
        .tx_pin = GPIO_PIN(PD, 10),
        .loc = LEUART_ROUTELOC0_RXLOC_LOC18 |
               LEUART_ROUTELOC0_TXLOC_LOC18,
        .cmu = cmuClock_LEUART0,
        .irq = LEUART0_IRQn
    }
}

Definition at line 187 of file periph_conf.h.