STM32 Nucleo-G474RE

Support for the STM32 Nucleo-G474RE. More...

Detailed Description

Support for the STM32 Nucleo-G474RE.

Flashing the device

The ST Nucleo-G474RE board includes an on-board ST-LINK V3 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look here for installation instructions), you can flash the board simply by typing

make BOARD=nucleo-g474re flash

and debug via GDB by simply typing

make BOARD=nucleo-g474re debug

Supported Toolchains

For using the ST Nucleo-G474RE board we recommend the usage of the GNU Tools for ARM Embedded Processors toolchain.

Files
file	periph_conf.h
	Peripheral MCU configuration for the nucleo-g474re board.