CC2538 RF core interface

Detailed Description

Files
file	cc2538_rfcore.h
	CC2538 RF core interface.

Data Structures
struct	cc2538_rfcore_t
	RF Core component registers. More...

Macros
#define	RFCORE   ( (cc2538_rfcore_t*)0x40088580 )
	RF Core instance.

Enumerations
enum	{   DECZ = 0xc5, DECY = 0xc4, DECX = 0xc3, INCZ = 0xc2,   INCY = 0xc1, INCX = 0xc0, INCMAXY = 0xc8, RANDXY = 0xbd,   INT = 0xba, WAITX = 0xbc, SETCMP1 = 0xbe, WAIT_W = 0x80,   WEVENT1 = 0xb8, WEVENT2 = 0xb9, LABEL = 0xbb, RPT_C = 0xa0,   SKIP_S_C = 0x00, STOP = 0xd2, SNOP = 0xd0, SRXON = 0xd3,   STXON = 0xd9, STXONCCA = 0xda, SSAMPLECCA = 0xdb, SRFOFF = 0xdf,   SFLUSHRX = 0xdd, SFLUSHTX = 0xde, SACK = 0xd6, SACKPEND = 0xd7,   SNACK = 0xd8, SRXMASKBITSET = 0xd4, SRXMASKBITCLR = 0xd5, ISSTOP = 0xe2,   ISSTART = 0xe1, ISRXON = 0xe3, ISRXMASKBITSET = 0xe4, ISRXMASKBITCLR = 0xe5,   ISTXON = 0xe9, ISTXONCCA = 0xea, ISSAMPLECCA = 0xeb, ISRFOFF = 0xef,   ISFLUSHRX = 0xed, ISFLUSHTX = 0xee, ISACK = 0xe6, ISACKPEND = 0xe7,   ISNACK = 0xe8, ISCLEAR = 0xff }
	RF Core opcodes. More...

Enumeration Type Documentation

anonymous enum

anonymous enum

RF Core opcodes.

Enumerator
DECZ	Decrement Z.
DECY	Decrement Y.
DECX	Decrement X.
INCZ	Increment Z.
INCY	Increment Y.
INCX	Increment X.
INCMAXY	Increment Y not greater than M. | M (M = 0-7)
RANDXY	Load random value into X.
INT	Interrupt.
WAITX	Wait for X MAC timer overflows.
SETCMP1	Set the compare value of the MAC timer to the current timer value.
WAIT_W	Wait for W MAC timer overflows | W (W = 0-31)
WEVENT1	Wait until MAC timer event 1.
WEVENT2	Wait until MAC timer event 2.
LABEL	Set loop label.
RPT_C	Conditional repeat | N | C (N = 0, 8; C = 0-7)
SKIP_S_C	Conditional skip instruction | S | N | C.
STOP	Stop program execution.
SNOP	No operation.
SRXON	Enable and calibrate frequency synthesizer for RX.
STXON	Enable TX after calibration.
STXONCCA	Enable calibration and TX if CCA indicates a clear channel.
SSAMPLECCA	Sample the current CCA value to SAMPLED_CCA.
SRFOFF	Disable RX or TX and frequency synthesizer.
SFLUSHRX	Flush RX FIFO buffer and reset demodulator.
SFLUSHTX	Flush TX FIFO buffer.
SACK	Send acknowledge frame with pending field cleared.
SACKPEND	Send acknowledge frame with the pending field set.
SNACK	Abort sending of acknowledge frame.
SRXMASKBITSET	Set bit in RXENABLE register.
SRXMASKBITCLR	Clear bit in RXENABLE register.
ISSTOP	Stop program execution.
ISSTART	Start program execution.
ISRXON	Enable and calibrate frequency synthesizer for RX.
ISRXMASKBITSET	Set bit in RXENABLE.
ISRXMASKBITCLR	Clear bit in RXENABLE.
ISTXON	Enable TX after calibration.
ISTXONCCA	Enable calibration and TX if CCA indicates a clear channel.
ISSAMPLECCA	Sample the current CCA value to SAMPLED_CCA.
ISRFOFF	Disable RX or TX, and the frequency synthesizer.
ISFLUSHRX	Flush RX FIFO buffer and reset demodulator.
ISFLUSHTX	Flush TX FIFO buffer.
ISACK	Send acknowledge frame with the pending field cleared.
ISACKPEND	Send acknowledge frame with the pending field set.
ISNACK	Abort sending of acknowledge frame.
ISCLEAR	Clear CSP program memory, reset program counter.

Definition at line 225 of file cc2538_rfcore.h.