scd30.h File Reference

Device driver interface for the SCD30 sensor. More...

Detailed Description

Device driver interface for the SCD30 sensor.

Author

Nishchay Agrawal f2016.nosp@m.088@.nosp@m.pilan.nosp@m.i.bi.nosp@m.ts-pi.nosp@m.lani.nosp@m..ac.i.nosp@m.n

Puhang Ding czars.nosp@m.ir@g.nosp@m.mail..nosp@m.com

Jan Schlichter schli.nosp@m.chte.nosp@m.r@ibr.nosp@m..cs..nosp@m.tu-bs.nosp@m..de

Definition in file scd30.h.

#include "periph/i2c.h"
#include "saul.h"
#include "xtimer.h"

Include dependency graph for scd30.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Data Structures
struct	scd30_measurement_t
	Measurement from SCD30 sensor. More...
struct	scd30_params_t
	Device initialization parameters. More...
struct	scd30_t
	Device descriptor for the SCD30 sensor. More...

Macros
#define	SCD30_VERSION   0xD100
	SCD30 Configuration parameter commands. More...
#define	SCD30_STATUS   0x0202
	Get data ready status from scd30 device.
#define	SCD30_DATA   0x0300
	Get data from scd30 device.
#define	SCD30_START   0x0010
	Start measuring data from scd30 device.
#define	SCD30_STOP   0x0104
	Stop measuring data from scd30 device.
#define	SCD30_SOFT_RESET   0xD304
	Soft reset scd30 device.
#define	SCD30_INTERVAL   0x4600
	Set measurement interval (2-1800 seconds)
#define	SCD30_ASC   0x5306
	De-Activate Automatic Self-Calibration.
#define	SCD30_FRC   0x5204
	Forced Recalibration. More...
#define	SCD30_T_OFFSET   0x5403
	Set temperature Offset in 0.01 Celsius.
#define	SCD30_A_OFFSET   0x5102
	Altitude Compensation in meters above sea level.

Enumerations
enum	{   SCD30_OK = 0, SCD30_COM_FAILED = -1, SCD30_INVALID_VALUE = -2, SCD30_CRC_ERROR = -3,   SCD30_NO_NEW_DATA = -4 }
	Status and error codes for return values. More...

Functions
int8_t	scd30_init (scd30_t *dev, const scd30_params_t *params)
	Initialize SCD30. More...
int8_t	scd30_set_param (const scd30_t *dev, uint16_t param, uint16_t val)
	Set a configuration parameter of device. More...
int8_t	scd30_get_param (scd30_t *dev, uint16_t param, uint16_t *val)
	Get value set for a configuration parameter on the device. More...
int8_t	scd30_read_triggered (scd30_t *dev, scd30_measurement_t *result)
	read CO2 concentration, temperature and relative humidity once More...
uint8_t	scd30_read_periodic (scd30_t *dev, scd30_measurement_t *result)
	read co2 concentration, temperature and relative humidity when continuous measurements are being taken More...
int	scd30_start_periodic_measurement (scd30_t *dev, uint16_t *interval, uint16_t *apc)
	Initializes Continuous Measurements. More...
int8_t	scd30_stop_measurements (const scd30_t *dev)
	Stop Continuous measurements. More...
int8_t	scd30_reset (scd30_t *dev)
	Soft reset sensor. More...

Macro Definition Documentation

SCD30_FRC

#define SCD30_FRC   0x5204

Forced Recalibration.

400-2000ppm

Definition at line 51 of file scd30.h.

SCD30_VERSION

#define SCD30_VERSION   0xD100

SCD30 Configuration parameter commands.

Get scd30 version

Definition at line 38 of file scd30.h.

Enumeration Type Documentation

anonymous enum

anonymous enum

Status and error codes for return values.

Enumerator
SCD30_COM_FAILED	Communication with device failed.
SCD30_INVALID_VALUE	Device doesn't exist.
SCD30_CRC_ERROR	Invalid value or length.
SCD30_NO_NEW_DATA	No new data.

Definition at line 59 of file scd30.h.

Function Documentation

scd30_get_param()

int8_t scd30_get_param	(	scd30_t *	dev,
		uint16_t	param,
		uint16_t *	val
	)

Get value set for a configuration parameter on the device.

Parameters

dev	scd30 device
param	param to be set/operation to be performed param codes mentioned in scd30_internal
val	Pointer to the value to be set for that parameter

Returns

SCD30_OK on success

scd30_init()

int8_t scd30_init	(	scd30_t *	dev,
		const scd30_params_t *	params
	)

Initialize SCD30.

Parameters

dev	scd30 device
params	scd30 device params

Returns

SCD30_OK if device started

scd30_read_periodic()

uint8_t scd30_read_periodic	(	scd30_t *	dev,
		scd30_measurement_t *	result
	)

read co2 concentration, temperature and relative humidity when continuous measurements are being taken

Parameters

dev	scd30 device
result	struct to store result

Returns

SCD30_OK on success

scd30_read_triggered()

int8_t scd30_read_triggered	(	scd30_t *	dev,
		scd30_measurement_t *	result
	)

read CO2 concentration, temperature and relative humidity once

Parameters

dev	scd30 device
result	Values are stored in this struct

Returns

SCD30_OK on success

scd30_reset()

int8_t scd30_reset

(

scd30_t *

dev

)

Soft reset sensor.

Parameters

dev	scd30 dev device

Returns

SCD30_OK if soft reset successful

scd30_set_param()

int8_t scd30_set_param	(	const scd30_t *	dev,
		uint16_t	param,
		uint16_t	val
	)

Set a configuration parameter of device.

Parameters

dev	scd30 device
param	param to be set/operation to be performed param codes mentioned in scd30_internal
val	value to be set for that parameter

Returns

SCD30_OK on success

scd30_start_periodic_measurement()

int scd30_start_periodic_measurement	(	scd30_t *	dev,
		uint16_t *	interval,
		uint16_t *	apc
	)

Initializes Continuous Measurements.

Parameters

dev	scd30 device
interval	Interval at which new measurements have to be taken in seconds (between 2 and 1800 seconds, both inclusive)
apc	Average Pressure Compensation 0 to disable pressure compensation 700-1400 mBar for valid pressure compensation

Returns

SCD30_OK if device started

scd30_stop_measurements()

int8_t scd30_stop_measurements

(

const scd30_t *

dev

)

Stop Continuous measurements.

Parameters

dev	scd30 dev device

Returns

SCD30_OK if measurement stopped