gpio_params.h
Go to the documentation of this file.
1 /*
2  * Copyright (C) 2018 HAW Hamburg
3  *
4  * This file is subject to the terms and conditions of the GNU Lesser
5  * General Public License v2.1. See the file LICENSE in the top level
6  * directory for more details.
7  */
8 
19 #ifndef GPIO_PARAMS_H
20 #define GPIO_PARAMS_H
21 
22 #include "board.h"
23 #include "saul/periph.h"
24 
25 #ifdef __cplusplus
26 extern "C" {
27 #endif
28 
32 static const saul_gpio_params_t saul_gpio_params[] =
33 {
34  {
35  .name = "LED Builtin",
36  .pin = LED0_PIN,
37  .mode = GPIO_OUT
38  },
39  {
40  .name = "LED Red",
41  .pin = LED1_PIN,
42  .mode = GPIO_OUT,
43  .flags = (SAUL_GPIO_INVERTED | SAUL_GPIO_INIT_CLEAR)
44  },
45  {
46  .name = "LED Green",
47  .pin = LED2_PIN,
48  .mode = GPIO_OUT,
49  .flags = (SAUL_GPIO_INVERTED | SAUL_GPIO_INIT_CLEAR)
50  },
51  {
52  .name = "LED Blue",
53  .pin = LED3_PIN,
54  .mode = GPIO_OUT,
55  .flags = (SAUL_GPIO_INVERTED | SAUL_GPIO_INIT_CLEAR)
56  }
57 };
58 
59 #ifdef __cplusplus
60 }
61 #endif
62 
63 #endif /* GPIO_PARAMS_H */
64 
saul_gpio_params
static const saul_gpio_params_t saul_gpio_params[]
GPIO pin configuration.
Definition: gpio_params.h:32
periph.h
Parameter definitions for mapping peripherals directly to SAUL.
GPIO_OUT
@ GPIO_OUT
configure as output in push-pull mode
Definition: gpio.h:122
saul_gpio_params_t::name
const char * name
name of the device connected to this pin
Definition: periph.h:52
SAUL_GPIO_INIT_CLEAR
@ SAUL_GPIO_INIT_CLEAR
set pin inactive after init
Definition: periph.h:44
saul_gpio_params_t
Direct mapped GPIO configuration values.
Definition: periph.h:51
SAUL_GPIO_INVERTED
@ SAUL_GPIO_INVERTED
pin is used as inverted
Definition: periph.h:43
board.h
Board specific definitions for the SODAQ SARA AFF boards.