sps30.h File Reference
Driver for the Sensirion SPS30 Particulate Matter Sensor. More...
Detailed Description
Driver for the Sensirion SPS30 Particulate Matter Sensor.
Definition in file sps30.h.
Include dependency graph for sps30.h: This graph shows which files directly or indirectly include this file:Go to the source code of this file.
Data Structures | |
| struct | sps30_params_t |
| SPS30 device parameters. More... | |
| struct | sps30_t |
| SPS30 device instance. More... | |
| struct | sps30_data_t |
| Set of measured particulate matter values. More... | |
Macros | |
| #define | SPS30_FAN_CLEAN_S (10U) |
| Seconds the fan cleaning process takes in seconds. | |
| #define | SPS30_SER_ART_LEN (32U) |
| Length of serial and article code string. | |
| #define | SPS30_DEFAULT_ACI_S (604800UL) |
| Default fan auto-clean interval in seconds (1 week) | |
| #define | CONFIG_SPS30_ERROR_RETRY (500U) |
| Maximum number of automatic retries on communication errors. More... | |
Enumerations | |
| enum | sps30_error_code_t { SPS30_OK = 0, SPS30_CRC_ERROR, SPS30_I2C_ERROR } |
| SPS30 error codes (returned as negative values) More... | |
Functions | |
| int | sps30_init (sps30_t *dev, const sps30_params_t *params) |
| Initialize SPS30 sensor driver. More... | |
| int | sps30_start_measurement (const sps30_t *dev) |
| Enable the measurement action. More... | |
| int | sps30_stop_measurement (const sps30_t *dev) |
| Stops the measurement action. More... | |
| bool | sps30_data_ready (const sps30_t *dev, int *error) |
| Ask the device if a measurement is ready for reading. More... | |
| int | sps30_read_measurement (const sps30_t *dev, sps30_data_t *data) |
| Read a set of particulate matter measurements. More... | |
| int | sps30_read_ac_interval (const sps30_t *dev, uint32_t *seconds) |
| Read the fan auto-clean interval. More... | |
| int | sps30_write_ac_interval (const sps30_t *dev, uint32_t seconds) |
| Write the fan auto-clean interval. More... | |
| int | sps30_start_fan_clean (const sps30_t *dev) |
| Run a fan cleaning cycle manually. More... | |
| int | sps30_read_article_code (const sps30_t *dev, char *str, size_t len) |
| Read the article code from the sensor as string. More... | |
| int | sps30_read_serial_number (const sps30_t *dev, char *str, size_t len) |
| Read the serial number from the sensor as string. More... | |
| int | sps30_reset (const sps30_t *dev) |
| Reset the sensor. More... | |
| int | sps30_sleep (const sps30_t *dev) |
| Put the sensor in sleep mode. More... | |
| int | sps30_wakeup (const sps30_t *dev) |
| Wake up sensor from sleep mode (returns sensor to Idle mode) More... | |
