periph_conf.h File Reference

Peripheral MCU configuration for the Seeeduino Archo Pro board. More...

Detailed Description

Peripheral MCU configuration for the Seeeduino Archo Pro board.

Author

Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de

Bas Stottelaar basst.nosp@m.otte.nosp@m.laar@.nosp@m.gmai.nosp@m.l.com

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "vendor_conf.h"

Include dependency graph for periph_conf.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Timer configuration
#define	TIMER_NUMOF   (1U)
#define	TIMER_IRQ_PRIO   1
#define	TIMER_0_DEV   LPC_TIM0
#define	TIMER_0_CHANNELS   4
#define	TIMER_0_FREQ   (96000000ul)
#define	TIMER_0_MAX_VALUE   (0xffffffff)
#define	TIMER_0_CLKEN()   (LPC_SC->PCONP |= (1 << 1))
#define	TIMER_0_CLKDIS()   (LPC_SC->PCONP &= ~(1 << 1))
#define	TIMER_0_PLKSEL()   (LPC_SC->PCLKSEL0 |= (1 << 2))
#define	TIMER_0_ISR   isr_timer0
#define	TIMER_0_IRQ   TIMER0_IRQn

UART configuration
#define	UART_IRQ_PRIO   1
#define	UART_0_ISR   isr_uart0
#define	UART_1_ISR   isr_uart3
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

Variable Documentation

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev = (LPC_UART_TypeDef*)LPC_UART0,
        .irq_rx = UART0_IRQn,
        .clk_offset = 3,
        .pinsel = 0,
        .pinsel_shift = 2,
        .pinsel_af = 1,
    },
    {
        .dev = (LPC_UART_TypeDef*)LPC_UART3,
        .irq_rx = UART3_IRQn,
        .clk_offset = 25,
        .pinsel = 0,
        .pinsel_shift = 0,
        .pinsel_af = 2
    }
}

Definition at line 53 of file periph_conf.h.