Board specific definitions for the MSB-IoT board. More...

Detailed Description

Board specific definitions for the MSB-IoT board.

Definition in file board.h.

#include "cpu.h"
#include "periph_conf.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Functions
void	board_init (void)
	Initialize board specific hardware, including clock, LEDs and std-IO.

Configure connected CC1101 (radio) device
#define	CC110X_PARAM_SPI SPI_DEV(0)
	SPI interface CC1101 is connected to.

#define	CC110X_PARAM_CS GPIO_PIN(PORT_B, 12)
	CS pin of CC1101.

#define	CC110X_PARAM_GDO0 GPIO_PIN(PORT_C, 4)
	GDO0 pin of CC1101.

#define	CC110X_PARAM_GDO2 GPIO_PIN(PORT_C, 5)
	GDO2 pin of CC1101.

#define	CC110X_PARAM_SPI_CLOCK SPI_CLK_1MHZ
	SPI clock (reduced to work around hw bug)

Configure connected MPU-9150 device
#define	MPU9150_PARAM_COMP_ADDR (0x0E)
	I2C address of the MPU9150.

LED pin definitions and handlers
#define	LED0_PIN GPIO_PIN(PORT_B, 8)
	Pin of red LED.

#define	LED1_PIN GPIO_PIN(PORT_B, 14)
	Pin of yellow LED.

#define	LED2_PIN GPIO_PIN(PORT_B, 15)
	Pin of green LED.

#define	LED_PORT GPIOB
	GPIO port LEDs are connected to.

#define	LED0_MASK (1 << 8)
	Bitmask to address red LED in LED_PORT.

#define	LED1_MASK (1 << 14)
	Bitmask to address yellow LED in LED_PORT.

#define	LED2_MASK (1 << 15)
	Bitmask to address green LED in LED_PORT.

#define	LED0_ON (LED_PORT->BSRR = LED0_MASK)
	Turn red LED on.

#define	LED0_OFF (LED_PORT->BSRR = (LED0_MASK << 16))
	Turn red LED off.

#define	LED0_TOGGLE (LED_PORT->ODR ^= LED0_MASK)
	Toggle red LED.

#define	LED1_ON (LED_PORT->BSRR = LED1_MASK)
	Turn yellow LED on.

#define	LED1_OFF (LED_PORT->BSRR = (LED1_MASK << 16))
	Turn yellow LED off.

#define	LED1_TOGGLE (LED_PORT->ODR ^= LED1_MASK)
	Toggle yellow LED.

#define	LED2_ON (LED_PORT->BSRR = LED2_MASK)
	Turn green LED on.

#define	LED2_OFF (LED_PORT->BSRR = (LED2_MASK << 16))
	Turn green LED off.

#define	LED2_TOGGLE (LED_PORT->ODR ^= LED2_MASK)
	Toggle green LED.

Functions