Board specific configuration for the nRF52840-Dongle. More...

Detailed Description

Board specific configuration for the nRF52840-Dongle.

Definition in file board.h.

#include "cpu.h"
#include "board_common.h"
#include "periph/gpio.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

LED pin configuration
#define	LED0_PIN GPIO_PIN(0, 6)
	The LED labelled LD1.

#define	LED1_PIN GPIO_PIN(0, 8)
	The red channel of the LED labelled LD2.

#define	LED2_PIN GPIO_PIN(1, 9)
	The green channel of the LED labelled LD2.

#define	LED3_PIN GPIO_PIN(0, 12)
	The blue channel of the LED labelled LD2.

LED access macros
#define	LED0_ON gpio_clear(LED0_PIN)
	Enable LD1.

#define	LED0_OFF gpio_set(LED0_PIN)
	Disable LD1.

#define	LED0_TOGGLE gpio_toggle(LED0_PIN)
	Toggle LD1.

#define	LED1_ON gpio_clear(LED1_PIN)
	Enable LD2's red channel.

#define	LED1_OFF gpio_set(LED1_PIN)
	Disable LD2's red channel.

#define	LED1_TOGGLE gpio_toggle(LED1_PIN)
	Toggle LD2's red channel.

#define	LED2_ON gpio_clear(LED2_PIN)
	Enable LD2's green channel.

#define	LED2_OFF gpio_set(LED2_PIN)
	Disable LD2's green channel.

#define	LED2_TOGGLE gpio_toggle(LED2_PIN)
	Toggle LD2's green channel.

#define	LED3_ON gpio_clear(LED3_PIN)
	Enable LD2's blue channel.

#define	LED3_OFF gpio_set(LED3_PIN)
	Disable LD2's blue channel.

#define	LED3_TOGGLE gpio_toggle(LED3_PIN)
	Toggle LD2's blue channel.

Button pin configuration
#define	BTN0_PIN GPIO_PIN(1, 6)
	The button labelled SW1.

#define	BTN0_MODE GPIO_IN_PU
	The GPIO pin mode of the button labelled SW1.

LED pin configuration