Board specific definitions for the omote board. More...
Detailed Description
Board specific definitions for the omote board.
Definition in file board.h.
Include dependency graph for board.h: This graph shows which files directly or indirectly include this file:Go to the source code of this file.
Functions | |
| void | board_init (void) |
| Initialize board specific hardware, including clock, LEDs and std-IO. | |
LED pin definitions | |
| #define | LED0_PIN GPIO_PIN(3, 0) |
| #define | LED1_PIN GPIO_PIN(3, 4) |
| #define | LED0_MASK (1 << 0) |
| #define | LED1_MASK (1 << 4) |
| #define | LED0_ON (GPIO_D->DATA |= LED0_MASK) |
| #define | LED0_OFF (GPIO_D->DATA &= ~LED0_MASK) |
| #define | LED0_TOGGLE (GPIO_D->DATA ^= LED0_MASK) |
| #define | LED1_ON (GPIO_B->DATA |= LED1_MASK) |
| #define | LED1_OFF (GPIO_B->DATA &= ~LED1_MASK) |
| #define | LED1_TOGGLE (GPIO_B->DATA ^= LED1_MASK) |
| #define | LED_ALL_OFF |
| #define | LED_ALL_ON |
User button pin definition | |
| #define | BTN0_PIN GPIO_PIN(1, 0) |
| #define | BTN0_MODE GPIO_IN_PU |
Flash Customer Configuration Area (CCA) parameters | |
| #define | UPDATE_CCA (1) |
| #define | CCA_BACKDOOR_ENABLE (1) |
| #define | CCA_BACKDOOR_PORT_A_PIN (3) |
| Select button. | |
| #define | CCA_BACKDOOR_ACTIVE_LEVEL (0) |
| Active low. | |
| #define | BOOT_PIN GPIO_PIN(0, CCA_BACKDOOR_PORT_A_PIN) |
| BSL_BOOT Pin. | |
xtimer configuration | |
| #define | XTIMER_WIDTH (16) |
| #define | XTIMER_BACKOFF (50) |
| #define | XTIMER_ISR_BACKOFF (40) |
USB configuration | |
| #define | INTERNAL_PERIPHERAL_VID (0x0451) |
| #define | INTERNAL_PERIPHERAL_PID (0x16C8) |
