Detailed Description

Definition in file board.h.

#include "cpu.h"
#include "periph/gpio.h"
#include "cc2538_eui_primary.h"

Include dependency graph for board.h:

Functions
void	board_init (void)
	Initialize board specific hardware, including clock, LEDs and std-IO.

LED pin definitions and handlers
#define	LED0_PIN GPIO_PIN(2, 0)

#define	LED1_PIN GPIO_PIN(2, 1)

#define	LED2_PIN GPIO_PIN(2, 2)

#define	LED3_PIN GPIO_PIN(2, 3)

#define	LED_PORT GPIO_C

#define	LED0_BIT (1 << 0)
	red LED

#define	LED1_BIT (1 << 1)
	yellow LED

#define	LED2_BIT (1 << 2)
	green LED

#define	LED3_BIT (1 << 3)
	orange LED

#define	LED0_ON (LED_PORT->DATA \|= LED0_BIT)

#define	LED0_OFF (LED_PORT->DATA &= ~LED0_BIT)

#define	LED0_TOGGLE (LED_PORT->DATA ^= LED0_BIT)

#define	LED1_ON (LED_PORT->DATA \|= LED1_BIT)

#define	LED1_OFF (LED_PORT->DATA &= ~LED1_BIT)

#define	LED1_TOGGLE (LED_PORT->DATA ^= LED1_BIT)

#define	LED2_ON (LED_PORT->DATA \|= LED2_BIT)

#define	LED2_OFF (LED_PORT->DATA &= ~LED2_BIT)

#define	LED2_TOGGLE (LED_PORT->DATA ^= LED2_BIT)

#define	LED3_ON (LED_PORT->DATA \|= LED3_BIT)

#define	LED3_OFF (LED_PORT->DATA &= ~LED3_BIT)

#define	LED3_TOGGLE (LED_PORT->DATA ^= LED3_BIT)

Flash Customer Configuration Area (CCA) parameters
#define	UPDATE_CCA 1

#define	CCA_BACKDOOR_ENABLE 1

#define	CCA_BACKDOOR_PORT_A_PIN 3
	Select button.

#define	CCA_BACKDOOR_ACTIVE_LEVEL 0
	Active low.

Functions