Functions
board.h File Reference
Boards » Lobaro Lorabox

Support for Lobaro LoraBox. More...

Detailed Description

Support for Lobaro LoraBox.

Common pin definitions and board configuration options

Author
Leandro Lanzieri leand.nosp@m.ro.l.nosp@m.anzie.nosp@m.ri@h.nosp@m.aw-ha.nosp@m.mbur.nosp@m.g.de

Definition in file board.h.

+ This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Functions

void board_init (void)
 Initialize board specific hardware, including clock, LEDs and std-IO.
 

xtimer configuration

#define XTIMER_WIDTH   (16)
 
#define XTIMER_BACKOFF   (50)
 
#define XTIMER_ISR_BACKOFF   (40)
 

LED pin definitions and handlers

#define LED0_PORT   GPIOA
 
#define LED0_PIN   GPIO_PIN(PORT_A, 1)
 
#define LED0_MASK   (1 << 1)
 
#define LED0_ON   (LED0_PORT->BSRR = (LED0_MASK << 16))
 
#define LED0_OFF   (LED0_PORT->BSRR = LED0_MASK)
 
#define LED0_TOGGLE   (LED0_PORT->ODR ^= LED0_MASK)
 
#define EN3V3_PORT   GPIOA
 
#define EN3V3_PIN   GPIO_PIN(PORT_A, 11)
 
#define EN3V3_MASK   (1 << 11)
 
#define EN3V3_ON   (EN3V3_PORT->BSRR = EN3V3_MASK)
 
#define EN3V3_OFF   (EN3V3_PORT->BSRR = (EN3V3_MASK << 16))
 
#define EN3V3_TOGGLE   (EN3V3_PORT->ODR ^= EN3V3_MASK)
 

SX127X

SX127X configuration.

#define SX127X_PARAM_SPI_NSS   GPIO_PIN(PORT_B, 0)
 
#define SX127X_PARAM_RESET   GPIO_PIN(PORT_A, 4)
 
#define SX127X_PARAM_DIO0   GPIO_PIN(PORT_B, 1)
 
#define SX127X_PARAM_DIO1   GPIO_PIN(PORT_B, 10)
 
#define SX127X_PARAM_DIO2   GPIO_PIN(PORT_B, 11)
 
#define SX127X_PARAM_DIO3   GPIO_PIN(PORT_B, 7)