Functions
board.h File Reference
Boards » OpenMote-b

Board specific definitions for the OpenMote-B board. More...

Detailed Description

Board specific definitions for the OpenMote-B board.

Author
Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de
Kevin Weiss kevin.nosp@m..wei.nosp@m.ss@ha.nosp@m.w-ha.nosp@m.mburg.nosp@m..de

Definition in file board.h.

#include "cpu.h"
#include "periph/gpio.h"
#include "cc2538_eui_primary.h"
+ Include dependency graph for board.h:
+ This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Functions

void board_init (void)
 Initialize board specific hardware, including clock, LEDs and std-IO.
 

LED pin definitions and handlers

#define LED0_PIN   GPIO_PIN(2, 4)
 
#define LED1_PIN   GPIO_PIN(2, 7)
 
#define LED2_PIN   GPIO_PIN(2, 6)
 
#define LED3_PIN   GPIO_PIN(2, 5)
 
#define BTN0_PIN   GPIO_PIN(3, 5)
 
#define BTN0_MODE   GPIO_IN
 
#define RF24_SWITCH_CC2538_PIN   GPIO_PIN(3, 4)
 PD4 – CC2538.
 
#define RF24_SWITCH_AT86RF215_PIN   GPIO_PIN(3, 3)
 PD3 – AT86RF215.
 
#define LED_PORT   GPIO_C
 
#define LED0_MASK   (1 << 4)
 
#define LED1_MASK   (1 << 7)
 
#define LED2_MASK   (1 << 6)
 
#define LED3_MASK   (1 << 5)
 
#define RF_SWITCH_PORT   GPIO_D
 
#define RF24_SWITCH_CC2538_MASK   (1 << 4)
 
#define RF24_SWITCH_AT86RF215_MASK   (1 << 3)
 
#define LED0_ON   (LED_PORT->DATA &= ~LED0_MASK)
 
#define LED0_OFF   (LED_PORT->DATA |= LED0_MASK)
 
#define LED0_TOGGLE   (LED_PORT->DATA ^= LED0_MASK)
 
#define LED1_ON   (LED_PORT->DATA &= ~LED1_MASK)
 
#define LED1_OFF   (LED_PORT->DATA |= LED1_MASK)
 
#define LED1_TOGGLE   (LED_PORT->DATA ^= LED1_MASK)
 
#define LED2_ON   (LED_PORT->DATA &= ~LED2_MASK)
 
#define LED2_OFF   (LED_PORT->DATA |= LED2_MASK)
 
#define LED2_TOGGLE   (LED_PORT->DATA ^= LED2_MASK)
 
#define LED3_ON   (LED_PORT->DATA &= ~LED3_MASK)
 
#define LED3_OFF   (LED_PORT->DATA |= LED3_MASK)
 
#define LED3_TOGGLE   (LED_PORT->DATA ^= LED3_MASK)
 
#define RF24_SWITCH_CC2538_ON   (RF_SWITCH_PORT->DATA &= ~RF24_SWITCH_CC2538_MASK)
 
#define RF24_SWITCH_CC2538_OFF   (RF_SWITCH_PORT->DATA |= RF24_SWITCH_CC2538_MASK)
 
#define RF24_SWITCH_CC2538_TOGGLE   (RF_SWITCH_PORT->DATA ^= RF24_SWITCH_CC2538_MASK)
 
#define RF24_SWITCH_AT86RF215_ON   (RF_SWITCH_PORT->DATA &= ~RF24_SWITCH_AT86RF215_MASK)
 
#define RF24_SWITCH_AT86RF215_OFF   (RF_SWITCH_PORT->DATA |= RF24_SWITCH_AT86RF215_MASK)
 
#define RF24_SWITCH_AT86RF215_TOGGLE   (RF_SWITCH_PORT->DATA ^= RF24_SWITCH_AT86RF215_MASK)
 

RF CORE observable signals settings

#define CONFIG_CC2538_RF_OBS_SIG_0_PCX   5 /* PC5 */
 
#define CONFIG_CC2538_RF_OBS_SIG_1_PCX   6 /* PC6 */
 
#define CONFIG_CC2538_RF_OBS_SIG_2_PCX   7 /* PC7 */
 

OpenWSN leds configuration

Note
This configuration mimics the one done in OpenWSN-fw for the same platform
#define OPENWSN_LEDPIN_ERROR   LED0_PIN
 
#define OPENWSN_LEDPIN_SYNC   LED1_PIN
 
#define OPENWSN_LEDPIN_RADIO   LED3_PIN
 
#define OPENWSN_LEDPIN_DEBUG   LED2_PIN
 

OpenWSN debugpins configuration

Note
This configuration mimics the one done in OpenWSN-fw for the same platform
#define OPENWSN_DEBUGPIN_FRAME   GPIO_PIN(0, 7) /* A7 */
 
#define OPENWSN_DEBUGPIN_ISR   GPIO_PIN(2, 3) /* C3 */
 
#define OPENWSN_DEBUGPIN_SLOT   GPIO_PIN(1, 3) /* B3 */
 
#define OPENWSN_DEBUGPIN_FSM   GPIO_PIN(1, 2) /* B2 */
 
#define OPENWSN_DEBUGPIN_TASK   GPIO_PIN(1, 1) /* B1 */
 
#define OPENWSN_DEBUGPIN_RADIO   GPIO_PIN(1, 0) /* B0 */
 

AT86RF215 configuration

#define AT86RF215_PARAM_SPI   SPI_DEV(0)
 
#define AT86RF215_PARAM_CS   GPIO_PIN(0, 3) /* A3 */
 
#define AT86RF215_PARAM_INT   GPIO_PIN(3, 0) /* D0 */
 
#define AT86RF215_PARAM_RESET   GPIO_PIN(3, 1) /* D1 */
 

xtimer configuration

#define XTIMER_WIDTH   (16)
 
#define XTIMER_BACKOFF   (50)
 
#define XTIMER_ISR_BACKOFF   (40)
 

Flash Customer Configuration Area (CCA) parameters

#define UPDATE_CCA   (1)
 
#define CCA_BACKDOOR_ENABLE   (1)
 
#define CCA_BACKDOOR_PORT_A_PIN   (6)
 BSL_BOOT Pin.
 
#define CCA_BACKDOOR_ACTIVE_LEVEL   (0)
 Active low.
 
#define BOOT_PIN   GPIO_PIN(0, CCA_BACKDOOR_PORT_A_PIN)
 BSL_BOOT Pin.