Functions
board.h File Reference
Boards » Silicon Labs STK3600 starter kit

Board specific definitions for the STK3600 starter kit. More...

Detailed Description

Board specific definitions for the STK3600 starter kit.

Author
Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de
Bas Stottelaar basst.nosp@m.otte.nosp@m.laar@.nosp@m.gmai.nosp@m.l.com

Definition in file board.h.

#include "cpu.h"
#include "periph_conf.h"
#include "periph/adc.h"
#include "periph/gpio.h"
#include "periph/spi.h"
+ Include dependency graph for board.h:
+ This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Functions

void board_init (void)
 Initialize the board (GPIO, sensors, clocks).
 

Xtimer configuration

The timer runs at 250 kHz to increase accuracy, or at 32.768 kHz if LETIMER is used.

#define XTIMER_DEV   (TIMER_DEV(0))
 
#define XTIMER_HZ   (250000UL)
 
#define XTIMER_WIDTH   (16)
 
#define XTIMER_CHAN   (0)
 

Board controller configuration

Define the GPIO pin to enable the BC, to allow serial communication via the USB port.

#define BC_PIN   GPIO_PIN(PF, 7)
 

Push button pin definitions

#define PB0_PIN   GPIO_PIN(PB, 9)
 
#define PB1_PIN   GPIO_PIN(PB, 10)
 

LED pin definitions

#define LED0_PIN   GPIO_PIN(PE, 2)
 
#define LED1_PIN   GPIO_PIN(PE, 3)
 

Macros for controlling the on-board LEDs

#define LED0_ON   gpio_set(LED0_PIN)
 
#define LED0_OFF   gpio_clear(LED0_PIN)
 
#define LED0_TOGGLE   gpio_toggle(LED0_PIN)
 
#define LED1_ON   gpio_set(LED1_PIN)
 
#define LED1_OFF   gpio_clear(LED1_PIN)
 
#define LED1_TOGGLE   gpio_toggle(LED1_PIN)
 

Core temperature sensor configuration

Connection to the on-chip temperature sensor.

#define CORETEMP_ADC   ADC_LINE(0)