periph_conf.h File Reference

#include "periph_cpu.h"

Include dependency graph for periph_conf.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Clock system configuration
#define	CLOCK_CORECLOCK   (48000000ul)
#define	CLOCK_BUSCLOCK   (CLOCK_CORECLOCK / 1)
static const clock_config_t	clock_config

Timer configuration
#define	PIT_NUMOF   (2U)
#define	PIT_CONFIG
#define	LPTMR_NUMOF   (0U)
#define	LPTMR_CONFIG   {}
#define	TIMER_NUMOF   ((PIT_NUMOF) + (LPTMR_NUMOF))
#define	PIT_BASECLOCK   (CLOCK_BUSCLOCK)
#define	PIT_ISR_0   isr_pit1
#define	PIT_ISR_1   isr_pit3
#define	LPTMR_ISR_0   isr_lptmr0

UART configuration
#define	UART_0_ISR   (isr_uart2_rx_tx)
#define	UART_1_ISR   (isr_uart0_rx_tx)
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

ADC configuration
#define	ADC_NUMOF   ARRAY_SIZE(adc_config)
#define	ADC_REF_SETTING   0
static const adc_conf_t	adc_config []

PWM configuration
#define	PWM_NUMOF   ARRAY_SIZE(pwm_config)
static const pwm_conf_t	pwm_config []

SPI device configuration
Clock configuration values based on the configured 48Mhz module clock. Auto-generated by: cpu/kinetis/dist/calc_spi_scalers/calc_spi_scalers.c
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const uint32_t	spi_clk_config []
static const spi_conf_t	spi_config []

I2C configuration
#define	I2C_NUMOF   ARRAY_SIZE(i2c_config)
#define	I2C_0_ISR   (isr_i2c1)
static const i2c_conf_t	i2c_config []

Macro Definition Documentation

PIT_CONFIG

#define PIT_CONFIG

Value:

        {                 \
        {                            \
            .prescaler_ch = 0,       \
            .count_ch = 1,           \
        },                           \
        {                            \
            .prescaler_ch = 2,       \
            .count_ch = 3,           \
        },                           \
    }

Definition at line 74 of file periph_conf.h.

Variable Documentation

adc_config

const adc_conf_t adc_config[]

static

Initial value:

= {
    [ 0] = { .dev = ADC0, .pin = GPIO_PIN(PORT_E, 2), .chan =  1, .avg = ADC_AVG_MAX },
    [ 1] = { .dev = ADC0, .pin = GPIO_PIN(PORT_E, 3), .chan =  1, .avg = ADC_AVG_MAX },
    [ 2] = { .dev = ADC0, .pin = GPIO_PIN(PORT_D, 7), .chan = 22, .avg = ADC_AVG_MAX },
    [ 3] = { .dev = ADC0, .pin = GPIO_PIN(PORT_D, 5), .chan =  6, .avg = ADC_AVG_MAX },
    [ 4] = { .dev = ADC0, .pin = GPIO_PIN(PORT_E, 0), .chan = 10, .avg = ADC_AVG_MAX },
    [ 5] = { .dev = ADC0, .pin = GPIO_PIN(PORT_E, 1), .chan = 11, .avg = ADC_AVG_MAX }
}

Definition at line 137 of file periph_conf.h.

clock_config

const clock_config_t clock_config

static

Initial value:

= {
    
    .clkdiv1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(0) |
               SIM_CLKDIV1_OUTDIV4(1),
    .rtc_clc = 0, 
    .osc32ksel = SIM_SOPT1_OSC32KSEL(2),
    .clock_flags =
        
        KINETIS_CLOCK_RTCOSC_EN |
        KINETIS_CLOCK_USE_FAST_IRC |
        0,
    .default_mode = KINETIS_MCG_MODE_PEE,
    
    .erc_range = KINETIS_MCG_ERC_RANGE_HIGH,
    .osc_clc = 0, 
    .oscsel = MCG_C7_OSCSEL(0), 
    .fcrdiv = MCG_SC_FCRDIV(0), 
    .fll_frdiv = MCG_C1_FRDIV(0b010), 
    .fll_factor_fei = KINETIS_MCG_FLL_FACTOR_1464, 
    .fll_factor_fee = KINETIS_MCG_FLL_FACTOR_1280, 
    .pll_prdiv = MCG_C5_PRDIV0(0b00001), 
    .pll_vdiv = MCG_C6_VDIV0(0b00000), 
}

Definition at line 36 of file periph_conf.h.

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .i2c = I2C1,
        .scl_pin = GPIO_PIN(PORT_E,  1),
        .sda_pin = GPIO_PIN(PORT_E,  0),
        .freq = CLOCK_BUSCLOCK,
        .speed = I2C_SPEED_FAST,
        .irqn = I2C1_IRQn,
        .scl_pcr = (PORT_PCR_MUX(6) | PORT_PCR_ODE_MASK),
        .sda_pcr = (PORT_PCR_MUX(6) | PORT_PCR_ODE_MASK),
    },
}

Definition at line 261 of file periph_conf.h.

pwm_config

const pwm_conf_t pwm_config[]

static

Initial value:

= {
    {
        .ftm        = FTM0,
        .chan       = {
            { .pin = GPIO_PIN(PORT_A, 4), .af = 3, .ftm_chan = 1 },
            { .pin = GPIO_PIN(PORT_D, 4), .af = 4, .ftm_chan = 4 },
            { .pin = GPIO_PIN(PORT_D, 6), .af = 4, .ftm_chan = 6 },
            { .pin = GPIO_PIN(PORT_A, 1), .af = 3, .ftm_chan = 1 }
        },
        .chan_numof = 4,
        .ftm_num    = 0
    }
}

Definition at line 159 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev    = UART2,
        .freq   = CLOCK_BUSCLOCK,
        .pin_rx = GPIO_PIN(PORT_D, 2),
        .pin_tx = GPIO_PIN(PORT_D, 3),
        .pcr_rx = PORT_PCR_MUX(3),
        .pcr_tx = PORT_PCR_MUX(3),
        .irqn   = UART2_RX_TX_IRQn,
        .scgc_addr = &SIM->SCGC4,
        .scgc_bit = SIM_SCGC4_UART2_SHIFT,
        .mode   = UART_MODE_8N1,
        .type   = KINETIS_UART,
    },
    {
        .dev    = UART0,
        .freq   = CLOCK_CORECLOCK,
        .pin_rx = GPIO_PIN(PORT_D, 6),
        .pin_tx = GPIO_PIN(PORT_D, 7),
        .pcr_rx = PORT_PCR_MUX(3),
        .pcr_tx = PORT_PCR_MUX(3),
        .irqn   = UART0_RX_TX_IRQn,
        .scgc_addr = &SIM->SCGC4,
        .scgc_bit = SIM_SCGC4_UART0_SHIFT,
        .mode   = UART_MODE_8N1,
        .type   = KINETIS_UART,
    }
}

Definition at line 98 of file periph_conf.h.