Here is a list of all documented struct and union fields with links to the struct/union documentation for each field:
- g -
- g
: color_rgb_t
- g_mop_prf
: gnrc_rpl_dio_t
- gain
: hmc5883l_params_t
, hmc5883l_t
, tsl2561_params_t
- gaphandle
: nimble_netif_conn_t
- gas_index
: bme680_field_data
- gas_measure
: bme680_params_t
- gas_resistance
: bme680_field_data
- gclk_ctrl
: tc32_conf_t
- gclk_id
: tc_tcc_cfg_t
- gclk_src
: i2c_conf_t
, pwm_conf_t
, sam0_common_usb_config_t
, spi_conf_t
, tc32_conf_t
, uart_conf_t
- gdo0
: cc110x_params_t
- gdo2
: cc110x_params_t
- generic
: sock_event_cb_t
- get
: candev_driver
, gnrc_netif_ops
, netdev_driver
, usbdev_driver
- get_cap
: ieee802154_radio_ops
- get_cbs
: netdev_test_t
- get_chip_id
: hard_api_t
- get_counter
: rtt_hw_driver_t
- get_descriptor_len
: usbus_descr_gen_funcs_t
- get_fl_size
: hard_api_t
- get_id()
: riot::thread
- get_seq_no
: suit_storage_driver
- global
: fib_entry_t
- global_flags
: fib_entry_t
- gomach_info
: gomach
- gpio
: _adc_hw_t
, isl29125_params_t
, pir_params_t
, pulse_counter_params_t
- gpio_brake_invert
: motor_t
- gpio_config
: ina3221_params_t
- gpio_dir0
: motor_t
- gpio_dir1_or_brake
: motor_t
- gpio_dir_reverse
: motor_t
- gpio_enable
: motor_t
- gpio_enable_invert
: motor_t
- gpio_flank
: pulse_counter_params_t
- gpio_init
: apds99xx_t
- gpio_mode
: ph_oem_params
- gpio_port
: spi_conf_t
- gpio_sysctl
: spi_conf_t
- GPIOCLKGDS
: prcm_regs_t
- GPIOCLKGR
: prcm_regs_t
- GPIOCLKGS
: prcm_regs_t
- GPIOCR
: cc2538_gpio_t
- GPIODIE
: aux_aiodio_regs_t
- GPIODIN
: aux_aiodio_regs_t
- GPIODOUT
: aux_aiodio_regs_t
- GPIODOUTCLR
: aux_aiodio_regs_t
- GPIODOUTSET
: aux_aiodio_regs_t
- GPIODOUTTGL
: aux_aiodio_regs_t
- GPIOLOCK
: cc2538_gpio_t
- GPTCLKDIV
: prcm_regs_t
- GPTCLKGDS
: prcm_regs_t
- GPTCLKGR
: prcm_regs_t
- GPTCLKGS
: prcm_regs_t
- green
: apds99xx_rgb_t
, isl29125_rgb_t
, tcs37727_data_t
- groups
: gnrc_netif_ipv6_t
- gyro_decimation
: lsm6dsl_params_t
- gyro_fs
: lsm6dsl_params_t
- gyro_fsr
: mpu9x50_status_t
- gyro_odr
: lsm6dsl_params_t
- gyro_pwr
: mpu9x50_status_t
- gyro_scale
: bmx055_params_t