#include "periph_cpu.h"

Include dependency graph for periph_conf.h:

This graph shows which files directly or indirectly include this file:

Clock system configuration
#define	CLOCK_CORECLOCK (60000000ul)

#define	CLOCK_BUSCLOCK (CLOCK_CORECLOCK / 1)

static const clock_config_t	clock_config

Timer configuration
#define	PIT_NUMOF (2U)

#define	PIT_CONFIG

#define	LPTMR_NUMOF (1U)

#define	LPTMR_CONFIG

#define	TIMER_NUMOF ((PIT_NUMOF) + (LPTMR_NUMOF))

#define	PIT_BASECLOCK (CLOCK_BUSCLOCK)

#define	PIT_ISR_0 isr_pit1

#define	PIT_ISR_1 isr_pit3

#define	LPTMR_ISR_0 isr_lptmr0

UART configuration
#define	UART_0_ISR (isr_uart0_rx_tx)

#define	UART_NUMOF ARRAY_SIZE(uart_config)

static const uart_conf_t	uart_config []

ADC configuration
#define	ADC_NUMOF ARRAY_SIZE(adc_config)

#define	ADC_REF_SETTING 0

static const adc_conf_t	adc_config []

PWM configuration
#define	PWM_NUMOF ARRAY_SIZE(pwm_config)

static const pwm_conf_t	pwm_config []

SPI configuration
Clock configuration values based on the configured 30Mhz module clock. Auto-generated by: cpu/kinetis/dist/calc_spi_scalers/calc_spi_scalers.c
#define	SPI_NUMOF ARRAY_SIZE(spi_config)

static const uint32_t	spi_clk_config []

static const spi_conf_t	spi_config []

I2C configuration
#define	I2C_NUMOF ARRAY_SIZE(i2c_config)

#define	I2C_0_ISR (isr_i2c0)

#define	I2C_1_ISR (isr_i2c1)

static const i2c_conf_t	i2c_config []

Macro Definition Documentation

◆ LPTMR_CONFIG

#define LPTMR_CONFIG

Value:

    {          \
    {                           \
        .dev = LPTMR0,          \
        .irqn = LPTMR0_IRQn,    \
        .src = 2,               \
        .base_freq = 32768u,    \
    },                          \
}

Definition at line 84 of file periph_conf.h.

◆ PIT_CONFIG

#define PIT_CONFIG

Value:

        {            \
        {                       \
            .prescaler_ch = 0,  \
            .count_ch = 1,      \
        },                      \
        {                       \
            .prescaler_ch = 2,  \
            .count_ch = 3,      \
        },                      \
    }

Definition at line 73 of file periph_conf.h.

Variable Documentation

◆ adc_config

const adc_conf_t adc_config[]

static

Initial value:

= {
    [ 0] = { .dev = ADC0, .pin = GPIO_PIN(PORT_B,  2), .chan = 12, .avg = ADC_AVG_MAX }, 
    [ 1] = { .dev = ADC0, .pin = GPIO_PIN(PORT_B,  3), .chan = 13, .avg = ADC_AVG_MAX }, 
    [ 2] = { .dev = ADC1, .pin = GPIO_PIN(PORT_B, 10), .chan = 14, .avg = ADC_AVG_MAX }, 
    [ 3] = { .dev = ADC1, .pin = GPIO_PIN(PORT_B, 11), .chan = 15, .avg = ADC_AVG_MAX }, 
    [ 4] = { .dev = ADC1, .pin = GPIO_PIN(PORT_C, 11), .chan =  7, .avg = ADC_AVG_MAX }, 
    [ 5] = { .dev = ADC1, .pin = GPIO_PIN(PORT_C, 10), .chan =  6, .avg = ADC_AVG_MAX }, 
    [ 6] = { .dev = ADC0, .pin = GPIO_UNDEF          , .chan =  0, .avg = ADC_AVG_MAX }, 
    [ 7] = { .dev = ADC0, .pin = GPIO_UNDEF          , .chan = 19, .avg = ADC_AVG_MAX }, 
    [ 8] = { .dev = ADC0, .pin = GPIO_UNDEF          , .chan = (0 | ADC_SC1_DIFF_MASK), .avg = ADC_AVG_MAX }, 
    [ 9] = { .dev = ADC1, .pin = GPIO_UNDEF          , .chan =  0, .avg = ADC_AVG_MAX }, 
    [10] = { .dev = ADC1, .pin = GPIO_UNDEF          , .chan = 19, .avg = ADC_AVG_MAX }, 
    [11] = { .dev = ADC1, .pin = GPIO_UNDEF          , .chan = (0 | ADC_SC1_DIFF_MASK), .avg = ADC_AVG_MAX }, 
    [12] = { .dev = ADC0, .pin = GPIO_UNDEF          , .chan =  1, .avg = ADC_AVG_MAX }, 
    [13] = { .dev = ADC0, .pin = GPIO_UNDEF          , .chan = 20, .avg = ADC_AVG_MAX }, 
    [14] = { .dev = ADC0, .pin = GPIO_UNDEF          , .chan = (1 | ADC_SC1_DIFF_MASK), .avg = ADC_AVG_MAX }, 
    [15] = { .dev = ADC1, .pin = GPIO_UNDEF          , .chan =  1, .avg = ADC_AVG_MAX }, 
    [16] = { .dev = ADC1, .pin = GPIO_UNDEF          , .chan = 20, .avg = ADC_AVG_MAX }, 
    [17] = { .dev = ADC1, .pin = GPIO_UNDEF          , .chan = (1 | ADC_SC1_DIFF_MASK), .avg = ADC_AVG_MAX }, 
    
    
    [18] = { .dev = ADC0, .pin = GPIO_UNDEF, .chan = 26, .avg = ADC_AVG_NONE },
    
    
    [19] = { .dev = ADC0, .pin = GPIO_UNDEF, .chan = 27, .avg = ADC_AVG_MAX },
}

Definition at line 129 of file periph_conf.h.

◆ clock_config

const clock_config_t clock_config

static

Initial value:

= {
    
    .clkdiv1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(0) |
               SIM_CLKDIV1_OUTDIV3(2) | SIM_CLKDIV1_OUTDIV4(2),
    .rtc_clc = 0, 
    .osc32ksel = SIM_SOPT1_OSC32KSEL(2),
    .clock_flags =
        
        KINETIS_CLOCK_RTCOSC_EN |
        KINETIS_CLOCK_USE_FAST_IRC |
        0,
    .default_mode = KINETIS_MCG_MODE_PEE,
    
    .erc_range = KINETIS_MCG_ERC_RANGE_VERY_HIGH,
    .osc_clc = 0, 
    .oscsel = MCG_C7_OSCSEL(0), 
    .fcrdiv = MCG_SC_FCRDIV(0), 
    .fll_frdiv = MCG_C1_FRDIV(0b111), 
    .fll_factor_fei = KINETIS_MCG_FLL_FACTOR_1464, 
    .fll_factor_fee = KINETIS_MCG_FLL_FACTOR_1920, 
    .pll_prdiv = MCG_C5_PRDIV0(0b10011), 
    .pll_vdiv  = MCG_C6_VDIV0(0b00000), 
}

Definition at line 34 of file periph_conf.h.

◆ i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .i2c = I2C0,
        .scl_pin = GPIO_PIN(PORT_E, 24),
        .sda_pin = GPIO_PIN(PORT_E, 25),
        .freq = CLOCK_BUSCLOCK,
        .speed = I2C_SPEED_FAST,
        .irqn = I2C0_IRQn,
        .scl_pcr = (PORT_PCR_MUX(5) | PORT_PCR_ODE_MASK),
        .sda_pcr = (PORT_PCR_MUX(5) | PORT_PCR_ODE_MASK),
    },
}

Definition at line 259 of file periph_conf.h.

◆ pwm_config

const pwm_conf_t pwm_config[]

static

Initial value:

= {
    {
        .ftm        = FTM0,
        .chan       = {
            { .pin = GPIO_PIN(PORT_A, 4), .af = 3, .ftm_chan = 6 },
            { .pin = GPIO_PIN(PORT_A, 2), .af = 3, .ftm_chan = 7 },
            { .pin = GPIO_PIN(PORT_C, 2), .af = 4, .ftm_chan = 1 },
            { .pin = GPIO_PIN(PORT_C, 3), .af = 4, .ftm_chan = 2 }
        },
        .chan_numof = 4,
        .ftm_num    = 0
    }
}

Definition at line 172 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .dev      = SPI0,
        .pin_miso = GPIO_PIN(PORT_D, 3),
        .pin_mosi = GPIO_PIN(PORT_D, 2),
        .pin_clk  = GPIO_PIN(PORT_D, 1),
        .pin_cs   = {
            GPIO_PIN(PORT_D, 0),
            GPIO_UNDEF,
            GPIO_UNDEF,
            GPIO_UNDEF,
            GPIO_UNDEF
        },
        .pcr      = GPIO_AF_2,
        .simmask  = SIM_SCGC6_SPI0_MASK
    }
}

Definition at line 233 of file periph_conf.h.

◆ uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev    = UART0,
        .freq   = CLOCK_CORECLOCK,
        .pin_rx = GPIO_PIN(PORT_B, 16),
        .pin_tx = GPIO_PIN(PORT_B, 17),
        .pcr_rx = PORT_PCR_MUX(3),
        .pcr_tx = PORT_PCR_MUX(3),
        .irqn   = UART0_RX_TX_IRQn,
        .scgc_addr = &SIM->SCGC4,
        .scgc_bit = SIM_SCGC4_UART0_SHIFT,
        .mode   = UART_MODE_8N1,
        .type   = KINETIS_UART,
    },
}

Definition at line 104 of file periph_conf.h.

Clock system configuration

Timer configuration

UART configuration

ADC configuration

PWM configuration

SPI configuration

I2C configuration

Macro Definition Documentation

◆ LPTMR_CONFIG

◆ PIT_CONFIG

Variable Documentation

◆ adc_config

◆ clock_config

◆ i2c_config

◆ pwm_config

◆ spi_config

◆ uart_config