periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-l031k6 board. More...

Detailed Description

Peripheral MCU configuration for the nucleo-l031k6 board.

Author

Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de

Alexandre Aabdie alexa.nosp@m.ndre.nosp@m..abad.nosp@m.ie@i.nosp@m.nria..nosp@m.fr

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_i2c1_pb6_pb7.h"
#include "cfg_rtt_default.h"
#include "cfg_timer_tim2.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

#define	CONFIG_BOARD_HAS_LSE   1

UART configuration
#define	UART_0_ISR   (isr_usart2)
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

PWM configuration
#define	PWM_NUMOF   ARRAY_SIZE(pwm_config)
static const pwm_conf_t	pwm_config []

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []

ADC configuration
#define	ADC_NUMOF   ARRAY_SIZE(adc_config)
static const adc_conf_t	adc_config []

Variable Documentation

adc_config

const adc_conf_t adc_config[]

static

Initial value:

= {
    { GPIO_PIN(PORT_A, 0), 0 },  
    { GPIO_PIN(PORT_A, 1), 1 },  
    { GPIO_PIN(PORT_A, 3), 3 },  
    { GPIO_PIN(PORT_A, 4), 4 },  
    { GPIO_PIN(PORT_A, 5), 5 },  
    { GPIO_PIN(PORT_A, 6), 6 },  
    { GPIO_PIN(PORT_A, 7), 7 },  
}

Definition at line 110 of file periph_conf.h.

pwm_config

const pwm_conf_t pwm_config[]

static

Initial value:

= {
    {
        .dev      = TIM21,
        .rcc_mask = RCC_APB2ENR_TIM21EN,
        .chan     = { { .pin = GPIO_PIN(PORT_B, 6) , .cc_chan = 0 },
                      { .pin = GPIO_UNDEF,                   .cc_chan = 0 },
                      { .pin = GPIO_UNDEF,                   .cc_chan = 0 },
                      { .pin = GPIO_UNDEF,                   .cc_chan = 0 } },
        .af       = GPIO_AF5,
        .bus      = APB2
    }
}

Definition at line 67 of file periph_conf.h.

spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .dev      = SPI1,
        .mosi_pin = GPIO_PIN(PORT_B, 5),
        .miso_pin = GPIO_PIN(PORT_B, 4),
        .sclk_pin = GPIO_PIN(PORT_B, 3),
        .cs_pin   = GPIO_UNDEF,
        .mosi_af  = GPIO_AF0,
        .miso_af  = GPIO_AF0,
        .sclk_af  = GPIO_AF0,
        .cs_af    = GPIO_AF0,
        .rccmask  = RCC_APB2ENR_SPI1EN,
        .apbbus   = APB2
    }
}

Definition at line 87 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev        = USART2,
        .rcc_mask   = RCC_APB1ENR_USART2EN,
        .rx_pin     = GPIO_PIN(PORT_A, 15),
        .tx_pin     = GPIO_PIN(PORT_A, 2),
        .rx_af      = GPIO_AF4,
        .tx_af      = GPIO_AF4,
        .bus        = APB1,
        .irqn       = USART2_IRQn,
        .type       = STM32_USART,
        .clk_src    = 0, 
    }
}

Definition at line 43 of file periph_conf.h.