periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-l476rg board. More...

Detailed Description

Peripheral MCU configuration for the nucleo-l476rg board.

Author

Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de

Alexandre Abadie alexa.nosp@m.ndre.nosp@m..abad.nosp@m.ie@i.nosp@m.nria..nosp@m.fr

Michel Rottleuthner miche.nosp@m.l.ro.nosp@m.ttleu.nosp@m.thne.nosp@m.r@haw.nosp@m.-ham.nosp@m.burg..nosp@m.de

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_i2c1_pb8_pb9.h"
#include "cfg_rtt_default.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

#define	CONFIG_BOARD_HAS_LSE   1

DMA streams configuration
#define	DMA_0_ISR   isr_dma1_channel2
#define	DMA_1_ISR   isr_dma1_channel3
#define	DMA_2_ISR   isr_dma1_channel4
#define	DMA_3_ISR   isr_dma1_channel7
#define	DMA_NUMOF   ARRAY_SIZE(dma_config)
static const dma_conf_t	dma_config []

Timer configuration
#define	TIMER_0_ISR   isr_tim5
#define	TIMER_NUMOF   ARRAY_SIZE(timer_config)
static const timer_conf_t	timer_config []

UART configuration
#define	UART_0_ISR   (isr_usart2)
#define	UART_1_ISR   (isr_usart3)
#define	UART_2_ISR   (isr_usart1)
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

PWM configuration
#define	PWM_NUMOF   ARRAY_SIZE(pwm_config)
static const pwm_conf_t	pwm_config []

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []

ADC configuration
configure only ADC channels for the Arduino header pins A0-A5
#define	ADC_NUMOF   ARRAY_SIZE(adc_config)
static const adc_conf_t	adc_config []

Variable Documentation

adc_config

const adc_conf_t adc_config[]

static

Initial value:

= {
    {GPIO_PIN(PORT_A, 0), 0, 5},  
    {GPIO_PIN(PORT_A, 1), 0, 6},  
    {GPIO_PIN(PORT_A, 4), 1, 9},  
    {GPIO_PIN(PORT_B, 0), 1, 15}, 
    {GPIO_PIN(PORT_C, 1), 2, 2},  
    {GPIO_PIN(PORT_C, 0), 2, 1},  
}

Definition at line 217 of file periph_conf.h.

dma_config

const dma_conf_t dma_config[]

static

Initial value:

= {
    { .stream = 1 },    
    { .stream = 2 },    
    { .stream = 3 },    
    { .stream = 6 },    
}

Definition at line 44 of file periph_conf.h.

spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .dev      = SPI1,
        .mosi_pin = GPIO_PIN(PORT_A, 7),
        .miso_pin = GPIO_PIN(PORT_A, 6),
        .sclk_pin = GPIO_PIN(PORT_A, 5),
        .cs_pin   = GPIO_UNDEF,
        .mosi_af  = GPIO_AF5,
        .miso_af  = GPIO_AF5,
        .sclk_af  = GPIO_AF5,
        .cs_af    = GPIO_AF5,
        .rccmask  = RCC_APB2ENR_SPI1EN,
        .apbbus   = APB2,
 
 
 
 
 
 
    }
}

Definition at line 185 of file periph_conf.h.

timer_config

const timer_conf_t timer_config[]

static

Initial value:

= {
    {
        .dev      = TIM5,
        .max      = 0xffffffff,
        .rcc_mask = RCC_APB1ENR1_TIM5EN,
        .bus      = APB1,
        .irqn     = TIM5_IRQn
    }
}

Definition at line 64 of file periph_conf.h.